Matrix SPARSH VP210 User Manual

17 Matrix SPARSH VP210 User Guide
If you are using a third party DHCP Server, make sure you configure the following in the DHCP Sever to
provide Server Address:
• Select DHCP Option as 224 and Data type as ‘String’.
• Configure the Server Address in the format “IP_ADDRESS:PORT”. Where IP_ADDRESS will be the IP
Address/Domain Name of System and PORT will be the SPARSH Port of the System.
• The phone fetches all the configuration files from the System.
• You need to configure network parameters of the IP phone manually if any of them is not supplied by the
DHCP server or if your network does not support DHCP. For instructions see “Network Settings”.
• On successful download of all configuration files, the phone attempts to register with the System.
• After the phone starts successfully, the Home Screen appears, that is, the extension number, day, date and
time will appear on the LCD of the phone.
• You may adjust the LCD for brightness, contrast and backlight. For instructions, see “Customizing Your
SPARSH VP210”.
• When you access Dir, Logs, Fwd or Menu Key for the first time, the phone will provide the guidance for
using the Navigation Key as given below.
• Press OK Key, if you want the message to re-appear when you press the Dir, Logs, Fwd or Menu Key.
• Press Ack Key, if you do not want the message to appear again.

Matrix SPARSH VP210 Specifications

General

Brand	Matrix
Model	SPARSH VP210
Category	IP Phone
Language	English