What to do if my Matrix T5X GROUP TRAINING Music Mixer IO board does not have communication response?
If the IO board of your Matrix Music Mixer does not have a communication response, replace the UCB.
What to do if my Matrix T5X GROUP TRAINING Music Mixer has an incline motor disconnection?
If your Matrix Music Mixer is showing an incline motor disconnection: a. Check the incline motor wire connection between the incline and LCB. b. Check to see if the incline value changes on the display when the up/down keys are pressed (pins 1 & 2 for VR1 & VR2, pins 2 & 3 for VR2 & VR3). If there’s no change, replace the incline motor. If there’s a change, replace the LCB.
What should I do if my Matrix T5X GROUP TRAINING incline motor fails to operate?
If the incline motor on your Matrix Music Mixer fails to operate, run Auto Calibration. If the error code appears during auto-calibration, the machine can still function without repairs. However, if the error code occurs during a workout, replace the incline motor.
What to do if my Matrix Music Mixer main motor is disconnected?
If the main motor of your Matrix Music Mixer is disconnected: 1. Check the connection of the motor cable at the MCB. 2. Use a multimeter to check the 3 points (U/V/W) for resistance (pins 1 & 2 for U & V, pins 2 & 3 for V & W, pins 1 & 3 for U & W). If there is resistance, replace the MCB. If there is no resistance, replace the motor.
What to do if my Matrix Music Mixer main motor has over current?
If the main motor of your Matrix Music Mixer is experiencing over current, you should first check the condition of the running deck and belt, replacing the belt and flipping or replacing the running deck as needed. If the issue continues, replace the MCB.
What to do if my Matrix T5X GROUP TRAINING Music Mixer has motor over temperature?
If your Matrix Music Mixer indicates a motor over temperature issue: 1. Check the connection of the motor cable at the MCB. 2. Use a multi-meter to check the motor wire circuit by setting the multi-meter to Ohms and placing both terminals on the blue wires of the motor cable. If there is an Ohm reading above 0, replace the motor. If the Ohm reading is 0, replace the MCB.
What to do if my Matrix Music Mixer MCB is over temperature?
If the MCB (Motor Control Board) in your Matrix Music Mixer is overheating: 1. Check if both fans are operating, including the one mounted to the MCB and any external fan. Also, verify the fan connections at the MCB. 2. If the fans are running correctly, replace the MCB.
What to do if my Matrix Music Mixer speed up has over current?
If your Matrix Music Mixer shows a speed up over current error, first check the condition of the running deck and belt. Replace the belt and flip or replace the running deck as needed. If the problem persists, replace the MCB.
What to do if my Matrix Music Mixer speed down has over current?
If your Matrix Music Mixer indicates a speed down over current issue, start by checking the condition of the running deck and belt. Replace the belt and flip or replace the running deck as necessary. If the issue remains, replace the MCB.
What to do if my Matrix T5X GROUP TRAINING Music Mixer running status is over current?
If your Matrix Music Mixer displays a running status over current error, first check the condition of the running deck and belt. Replace the belt and flip or replace the running deck as needed. If the issue continues, replace the MCB.
General| Brand | Matrix |
|---|---|
| Model | T5X GROUP TRAINING |
| Category | Music Mixer |
| Language | English |
To Next Page
