Maxcess FIFE D-MAXE 1 - Page 36

95 pages

To Next Page

To Previous Page

OPERATING THE CONTROLLER5 - 8

D-MAXE with OI-TS www.maxcessintl.comMI 2-292 1 C

9Service

1 Measurements

2 Simulate Outputs

Details regarding the menus are explained in section

Menus,

page 7-1

Legend AExit menu

Main Page

Table of Contents3
Introduction7
About These Operating Instructions7
Proper Use8
Options8
Improper Use8
Operating Principle9
Modules9
Safety Instructions11
Important Information11
Information about Safety Instructions11
Symbols12
Preventing Hazards12
Installation and Commissioning12
Operation13
Maintenance13
Installation14
Transport and Storage14
Scope of Delivery14
Mounting15
Installation Location of D-MAXE Controller15
Mechanical Fastening of D-MAXE Controller15
Installation Location of D-MAX Operator Interface OI-TS17
Electrical Connection19
Emergency Stop19
Power Supply of D-MAXE Controller19
Power Supply of Operator Interface OI-TS19
Connecting the Sensors/Actuators19
Connections on the D-MAXE 1 Controller21
Connections on the D-MAXE 2 Controller21
Connections on the D-MAXE 3 Controller22
Leds on the D-MAXE Controller23
Operator Interface Oi-Ts24
OI-TS Description24
Buttons and Displays25
Header26
Select Operator Interface27
A Language27
B Select Device27
C Select Device Settings27
D OI Settings27
Operating the Controller29
User Level29
Select Devices/Actuators30
Select Operating Modes30
Select Jobs31
Shift Guide Point31
Moving the Actuator32
Menu Level32
Job Menu33
Servo-Center Menu34
Setup Menu35
Commissioning37
Before Commissioning37
Menus40
Notes40
Menu Identification40
Conventions40
Local Control41
1Y.3 Job42
1Y.3.Y0 Calibrate Sensors42
1Y.3.Y1 Guidepoint42
1Y.3.Y2 Auto Setup43
1Y.3.Y3 Gain43
1Y.3.Y4 OSC43
1Y.3.Y5 PIC43
1Y.3.Y6 ASC43
1Y.3.Y7 Deadband45
1Y.3.Y8 Polarity47
1Y.3.Y9 Speed Gain Control47
1Y.3.Y10 Actuator Speed48
1Y.4 Servo-Center49
1Y.4.1 Guidepoint49
1Y.4.2 Gain49
1Y.4.3 Polarity49
1Y.5 Hardware50
1Y.5.1 Sensors50
1Y.5.2 Actuator56
1Y.5.3 Digital Inputs56
1Y.5.4 Digital Outputs56
1Y.6 Control58
1Y.6.1 Modes58
1Y.6.2 Jobs58
1Y.6.3 Left/Right Buttons58
1Y.6.4 Local Control59
1Y.6.5 Unit59
1Y.6.6 Hardlock59
1Y.7 Administration60
Labels60
Backup & Restore60
Device Names61
1Y.8 Network62
MAXNET Settings62
Customer Settings63
1Y.8.8 Distributed System63
1Y.9 Service66
1Y.9.1 Measurements66
1Y.9.2 Simulate Outputs66
Maintenance68
Maintenance Work68
D-Maxe Decommissioning69
Decommissioning69
Troubleshooting70
Troubleshooting Procedure70
Display Possibilities70
Procedure70
Leds on the D-MAXE Controller71
D-MAXE Operator Interface OI-TS72
Icons in the Display of the D-MAX Operator Interface73
Faulty Behavior and Setting Errors75
Possible Causes for Faulty75
D-MAXE Behavior75
Faulty Behavior78
Fuse Replacement80
Technical Data81
General Information81
D-MAXE Controller81
D-MAX Operator Interface OI-TS82
Inputs and Outputs of the D-MAXE Controller82
Parallel Input Matrix84
Parallel Output Matrix84
Jobs85
Actuators86
Cable Lengths88
Standards88
Accessories (Optional)89
Input Devices89
Assembly Accessories89
Appendix A - Overview90
Appendix B - Symbols91
Appendix C - Terms92
Service95

Maxcess FIFE D-MAXE 1 - Page 36

Table of Contents

Related product manuals