Maxcess FIFE D-MAXE 1 - OI-TS Operator Interface Troubleshooting

TROUBLESHOOTING10 - 3
D-MAXE with OI-TS www.maxcessintl.comMI 2-292 1 C
D-MAXE operator
interface OI-TS
Faulty behavior Possible cause Remedy
Incorrect actions are
performed or none at all
The touch screen is calibrated
incorrectly
Test the touch screen (see
Debugging, page 4‑5 )
Recalibrate if necessary (see
Settings, page 4‑5 )