SAFETY INSTRUCTIONS 2 - 1
D-MAXE with OI-TSwww.maxcessintl.com MI 2-292 1 C
Sicherheit.fm
2 SAFETY INSTRUCTIONS
Important information Problem-free and reliable operation of the D-MAXE system
requires that the D-MAXE system is
– properly shipped and stored,
– properly mounted and placed in operation,
– properly used and carefully maintained.
Proper operation and careful maintenance will ensure a long
service life for the D-MAXE system.
Only persons who are acquainted with the installation,
commissioning, operation and maintenance of the system and
who possess the necessary qualifications for their activities may
work on the D-MAXE system.
Please note the following:
– The content of these operating instructions
– The safety instructions printed on the unit
– The requirements of the machine manufacturer
– National, state and local requirements for accident
prevention and environmental protection
Information about
safety instructions The safety instructions and symbols described in this section
are used in these Operating instructions. They are used to avoid
possible dangers for users and to prevent material damage.
SIGNAL WORD
Source of danger and its results.
Avoiding dangers
The signal word WARNING refers to the danger of moderate to
sever bodily injuries.
The signal word CAUTION refers to the danger of slight to
moderate bodily injuries or material damage.
To Next Page
Loading...
