27
Basic Operations
27
EN
Press to access the OSD menu. Use
keys to select PICTURE then press
to enter PICTURE menu.
Wide
Key
Changing Aspect Ratios
Using Remote Control
All widescreen viewing modes are available by
pressing the
key. Pressing this key
repeatedly will cycle through below modes:
Digital TV
Analog TV/Composite/S-Video Modes
Component/HDMI/PC Modes
AUTO
PANOROMIC
Using OSD Menu
Note:
Under Component, PC and HDMI input modes, only 16:9 and 4:3 modes are available.
Under Digital TV input modes, only 16:9, 4:3 and Auto modes are available.
Use keys to change your settings. After
achieving the disired setting, press key to
return to previous menu or press to exit
menu.
Press keys to select FORMAT then
use
to enter FORMAT setting.
FORMAT
To Next Page
Loading...
Need help?
General
