Maxent 50" User Manual

58
TV Functions
58
EN
Parental Block (V-Chip)
Use keys to select PARENTAL
BLOCK from SETUP options and press
to enter PARENTAL BLOCK settings.
Press to access the OSD menu. Use
keys to select SETUP then press or
to enter SETUP menu.
V-Chip (Parental Guide) function is to prevent children from watching programs that are not suitable such as
violent or adult content. The user must enter a PASSCODE before any of the V-Chip restrictions are set up or
changed.
Enabling V-Chip
V-Chip is initially shipped from the factory set to OFF. To enable V-Chip, please follow the steps below.
A window will now prompt the user to enter a
PASSCODE using the remote control. If the
default system PASSCODE has not been changed,
enter 0000 (this is the initial default from factory).
EXIT
EXIT
PASS CODE ENTER
ENTER CODE
As each numeric digit is entered, a small “X” fills
each slot. If the code entered is incorrect, an
“Error” status is displayed. Simply re-enter the
passcode again.
Notes:
 When entering the 4-digit passcode, please
enter the digits slowly. The TV will display “X”
in each of the number slots as it receives the
passcode.
 If the wrong passcode is entered three times,
the TV will go back to the SETUP menu.
EXIT
EXIT
ENTER NEW CODE
ENTER CODE
X
EXIT
EXIT
PASS CODE ENTER
ENTER CODE
PARENTAL
BLOCK

Maxent 50" Specifications

General

Brand	Maxent
Model	50"
Category	Plasma TV
Language	English