Maxent 50" User Manual

33
Picture Controls
33
EN
Available PIP Input Combinations
Main-picture and sub-picture input combinations are listed below for reference.
TV
TV
DTV
DTV
HDMI 1
HDMI 2
HDMI 1 HDMI 2
PC
PC
AV1
Changing Location of PIP Image
There are four preset positions where the PIP sub-window can be positioned. Once the PIP mode is turned on,
you can switch the PIP sub-picture position to any one of the four corners of the screen.
Press the key to switch positions. Press-
ing the key repeatedly will cycle through
all four corners of the screen.
Sub-Picture Positions
Default Position
Noise Reduction
To improve the quality of the picture in the case of poor reception.
Press to access the OSD menu and select
PICTURE from the menu. Use keys to
select PICTURE then press or to enter
PICTURE menu.
Use keys to select NOISE REDUCTION
then press to enter NOISE REDUCTION
setting.
Use keys to change your settings. After
achieving the disired setting, press key to
return to previous menu or press to exit menu.
NOISE
REDUCTION
Note:
 Sub-Picture feature is not available under S-
Video input mode.

Maxent 50" Specifications

General

Brand	Maxent
Model	50"
Category	Plasma TV
Language	English