15
DAB Operation Mode
1. Switch the MR-2000 on and press SOURCE repeatedly until <DAB RADIO> appears. First time
the MR-2000 is used it will automatically scan for DAB stations in your area and store them in
memory.
î Note: to enter DAB mode, you may also press to go back to <MAIN MENU>, and then press or and
select <DAB > and press OK to confirm.
2. Once the scanning is complete, the DAB stations will be displayed in alphanumeric order. The first
station on the list will be selected.
3. You can move back to the previous screen at any time by pressing . <Local scan>, <Full
scan> and <Manual tune> will then be available for your choice.
4. Once the scanning is completed, press or to cycle through stations list, and then press OK to
confirm.
To Next Page
Loading...
Need help?
General
