9
2. “Region choice” menu appears:
Step 3 – Select Your Network
1. Press or until your region is shown. Press OK to confirm and then your MR-2000 will ask you to
enter your network.
Step 4 – Enter Network
1. In some cases the MR-2000 may find more than one network. Press or to navigate through the
name list, and then press OK when the name of your network is displayed.
2. If you do not need a password to enter your network (WEP/WPA), the MR-2000 will connect to the
network and display:
3. If a WEP/WPA password is required, the MR-2000 will now ask you to type the WEP/WPA code and
will display the password entry screen:
a. Press or to navigate through the alpha-numeric character list. Press OK to select the
appointed character.
To Next Page
Loading...
Need help?
General
