41
11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
STEP 7 - ATTACH PUMP & BATTERY BOX FRAME
TO VEHICLE
TRAILER WITH PUMP & BATTERY BOX FRAME
FIG. 41-1
1. Use fl oor jack or equivalent lift-
ing device to place pump and
battery box frame in position on
vehicle body cross members as
shown in FIG. 41-1.
VEHICLE
BODY CROSS
MEMBERS
PUMP & BATTERY
BOX FRAME
NOTE: There are 2 methods to mount pump and battery box frame to vehicle frame.
• Bolt pump and battery box frame to hanger brackets welded to vehicle frame.
• Weld pump and battery box frame to vehicle frame.
NOTE: If pump and battery box frame is to be welded directly to cross members on
vehicle body, skip instructions 2 through 4. Continue with instruction 5.
To Next Page
Loading...
