About
About the Safety Precautions
IDX 70 User Manual
mmag | 2022-04 | rel10520
1-11
Requirements
• Make sure that all associated devices and components are installed according to local regulations.
• Be aware that, by principle, an electronic apparatus can not be considered fail-safe. Therefore, you must
make sure that any machine/apparatus has been fitted with independent monitoring and safety equip-
ment. If the machine/apparatus should break down, if it is operated incorrectly, if the control unit breaks
down or if the cables break or get disconnected, etc., the complete drive system must return – and be
kept – in a safe operating mode.
• Be aware that you are not entitled to perform any repair on components supplied by maxon.
Electrostatic sensitive device (ESD)
• Wear working cloth and use equipment in compliance with ESD protective measures.
• Handle device with extra care.
To Next Page
Loading...