Maintenance
Long-term Storage
IDX 70 User Manual
6-50 mmag | 2022-04 | rel10520
6.3 Long-term Storage
The IDX drive is intended for operation in new condition. Nevertheless, it can be stored over a longer period
of time without suffering permanent damage provided that you consider the following.
SHELF LIFE
• The lubricants used have a manufacturer-specific expiration date.
• Some lubricants are subject to oiling-out which can reduce characteristic properties of the lubricant.
• Provided that the below stated recommended storage conditions are met, the drive can be stored
over several years. Exemplary lifetime tests have confirmed operability even after several years of
storage time.
• Upon commissioning, the specified no load data may vary.
PACKAGING
• The drive’s packaging has a manufacturer-specific expiration date in respect to ESD protection.
We recommend to store electrostatic sensitive drive components in ESD-safe containers.
RECOMMENDED STORAGE CONDITIONS
• Storage temperature: −40…+35 °C
• Relative humidity: 20…80 %, non-condensing
• Free from noxious gas, no vibrations, no shocks
6.4 Decommissioning
Dismantling follows basically the Installation in reverse order:
a) chapter “4 Electrical Installation” on page 4-25
b) chapter “3 Mechanical Installation” on page 3-21
6.5 Disposal
In no case dispose used components with normal domestic waste.
To Next Page
Loading...