Maytronics BIO - 7. Dismantling the Driving System; Step 7.1 Remove the pulley together with the track from both sides of the robot.; Step 7.2 Remove the guide wheels.; Step 7.3 Remove the Active Brushs driving wheel from both sides of the robot.

BIO Disassembly Instructions
Page 8 of 11
7. Dismantling the Driving System
Step 7.1
Remove the
pulley together
with the track
from both sides
of the robot.
Step 7.2
Remove the guide
wheels.
Step 7.3
Remove the
Active Brush’s
driving wheel
from both sides
of the robot.
Step 7.4
Remove the side
floats from both
sides of the
robot.