Maytronics BIO - 9. Dismantling the Suction Inlet Plug; Step 9.1 Dismantle the inlet using a small and flat screwdriver.; Step 9.2 Remove the inlet.; 10. Dismantling the Brushes

BIO Disassembly Instructions
Page 10 of 11
9. Dismantling the Suction Inlet Plug
10. Dismantling the Brushes
Step 9.1
Dismantle the
inlet using a small
and flat
screwdriver.
Step 9.2
Remove the inlet.
Step 10.1
Remove the
brushes.
Tip:
Using a flat
screwdriver
makes it easier
to remove the
brush.