Maytronics BIO - 5. Assembling the Floating Cable; Step 5.1 Connect the cables retrofit to motor unit (mind the slot shape) and press it firmly.; Step 5.2 Press the seal firmly to the terminal.; Step 5.3 Tighten the nut properly by hand.

BIO Assembly Instructions
Page 6 of 14
5. Assembling the Floating Cable
Step 5.1
Connect the
cable's retrofit to
motor unit (mind
the slot shape)
and press it
firmly.
Step 5.2
Press the seal
firmly to the
terminal.
Step 5.3
Tighten the nut
properly by
hand.
Note:
There is only
one way for
the connector
to connect to
the motor
unit terminal.