Maytronics BIO - 9. Assembling the Impeller Cover; Step 9.1 Place the cable support in its place on the outer casing before closing the impeller cover.; Step 9.2 Position the impeller cover diagonally on the outer casing.; Step 9.3 Secure the impeller cover with a 50 X12 screw.

BIO Assembly Instructions
Page 9 of 14
9. Assembling the Impeller Cover
Step 9.1
Place the cable
support in its
place on the
outer casing
before closing
the impeller
cover.
Step 9.2
Position the
impeller cover
diagonally on the
outer casing.
Step 9.3
Secure the
impeller cover
with a 50X12
screw.