Mazda 2006-2008 RX7 Engine - Cylinder Head (I) Disassembly

MECHANICAL
01–10–6
Engine Workshop Manual LF L3 (1866–1U–05H)
Revised 12/2005 (Ref. No. R145/05)
CYLINDER HEAD (I) DISASSEMBLY
E5U011002000E04
1. Disassemble in the order indicated in the table..
9
8
7
5
4
4
3
1
2
2
R
6
R
R
R
WITH VARIABLE VALVE TIMING MECHANISM
*
*
*
*: IF WASHER IS NOT INSTALLED TO THE ENGINE, INSTALL A NEW WASHER.
E5U110ZECL01
1 Camshaft sprocket lock bolt, variable valve timing
actuator lock bolt (With variable valve timing
mechanism)
(See 01–10–7 Camshaft Sprocket Lock Bolt,
Variable Valve Timing Actuator Lock Bolt
Disassembly Note .)
2 Camshaft sprocket, variable valve timing actuator
(With variable valve timing mechanism)
3 Oil control valve (OCV) (with variable valve timing
mechanism)
4 Camshaft cap
(See 01–10–7 Camshaft Cap Disassembly Note.)
5 Camshaft
6 Tappet
(See 01–10–7 Tappet Disassembly Note.)
7 Cylinder head bolt
(See 01–10–8 Cylinder Head Bolt Disassembly
Note.)
8 Cylinder head
9 Cylinder head gasket