Mazda 6 - Cruise Control System

CRUISE CONTROL SYSTEM
T83
TT
OUTLINE
A6E812801011T01
• The cruise control system allows the driver to maintain selected vehicle speed without operating the
accelerator when driving on an open highway.
• The cruise actuator controls the throttle valve to maintain vehicle speed.
• The construction and operation of cruise control system is essentially carried over from that of the 626 (GF)
model, except for the following:
Comparison with 626 (GF) model
End Of Sie
STRUCTURAL VIEW
A6E812801011T02
.
CRUISE CONTROL SYSTEM
Item Comparison
Cruise actuator
• Cruise actuator with built-in control module has been adopted
• Motor-type system has been adopted
• Tap up/tap down function has been added
• Vehicle speed at which cruise control setting is available has been
changed
Actuator cable Actuator cable with adjuster has been adopted
Cruise control switch Embedded type (in steering wheel) has been adopted
Vehicle speed signal input
ABS (ABS/TCS) HU/CM (with ABS (ABS/TCS))
DSC HU/CM (with DSC)
Instrument cluster
Cruise set indicator light
LED has been adopted
Cruise main indicator light
Clutch switch (MTX)
Same as the 626 (GF) modelTR switch (ATX)
Brake switch
A6E8128T001
1 Cruise actuator
2 Actuator cable
3 TR switch (ATX)
4 Cruise main indicator light
5 Cruise set indicator light
6 Clutch switch (MTX)
7 Brake switch
8 Cruise control switch
9PCM
10 ABS (ABS/TCS) HU/CM (with ABS (ABS/TCS))
DSC HU/CM (with DSC)