Mazda 6 - Abbreviations; Cooling System; Features; Outline

E2
ABBREVIATIONS , OUTLINE
ABBREVIATIONS
A6E360102000T01
End Of Sie
OUTLINE OF CONSTRUCTION
A6E360201004T01
• L8, LF and L3 engine models are water cooled by forced circulation cooling systems.
End Of Sie
FEATURES
A6E360201004T02
Reduced weight and size
• Cross-flow type radiator with radiator tanks made of plastic and the core made of aluminum.
• Stainless steel thermostat body is built in the plastic thermostat case
• Built-in type water pump
Reduce engine noise and vibration
• The cooling fan is a thermo modulator system type.
• Electric cooling fan has been adopted.
Improved reliability
• The following have been adopted.
 Thermostat of highly durable wax type.
 Water pump that is built into cylinder block
End Of Sie
SPECIFICATIONS
A6E360201004T03
End Of Sie
ABBREVIATIONS
ATF Automatic transaxle fluid
ATX Automatic transaxle
OUTLINE
Item
Engine type
L8 LF L3
Cooling system Water-cooled, Electromotive
Coolant capacity
(Approximate quantity)
(L {US qt, lmp qt}) 7.5 {7.9, 6.6}
Water pump Type Centrifugal, V-ribbed belt-driven
Thermostat
Type Wax
Opening temperature (°C {°F}) 80.084.0 {176183.2}
Full-open temperature (°C {°F}) 97 {206.6}
Full-open lift (mm {in}) More then 8.0 {0.31} min.
Radiator Type Corrugated fin
Cap valve opening
pressure
(kPa {kgf/cm
2
, psi})
112.8142.2 {1.151.45, 16.420.6}
Cooling fan
Type Thermo-modulated, Electromotive
Blade
Outer
diameter
(mm {in}) 300 {11.8} 300 {11.8} 320 {12.6}
Quantity
Cooling fan No.1: 5
Cooling fan No.2: 7
(Except for
Israel)
Cooling fan
No.1: 5
Cooling fan
No.2: 7
(For Israel)
Cooling fan
No.1: 7
Cooling fan
No.2: 5
Cooling fan No.1: 7
Cooling fan No.2: 5