Mazda 6 - Cooling Fan

COOLING SYSTEM
E5
E
RADIATOR
A6E363015200T01
Structure
• A cross-flow radiator with corrugated fins is used for improved cooling.
• The radiator tanks are made of plastic and the core is made of aluminum.
• Four rubber-insulated mounting brackets are utilized to decrease vibration.
• The radiator has an ATF cooler in the radiator tank. (ATX)
• A small pressuring type cap has been adopted for
the radiator cap.
End Of Sie
COOLING FAN
A6E363015140T01
Structure
• Electric cooling fans No.1 and No.2, operated according to a fan control signal from the PCM, have been
adopted. Due to this, engine noise is reduced and rapid warming-up is possible.
• A cooling fan No.1 and No.2 is attached to the radiator cowling.
Cooling fan, fan motor specs:
End Of Sie
AME3602N003
ITEM
ENGINE
L8 LF L3
Cooling fan No.1
Number of
Blade
(sheet) 5
For Israel: 7
Except for
Israel: 5
7
Motor
output
(W)8080-12070
Cooling fan No.2
Number of
Blade
(sheet) 7
For Israel: 5
Except for
Israel: 7
5
Motor
output
(W) 80 80-120 120