20
3 On-road navigation
When fi rst started, the navigation system calculates routes using the road network of the high
quality vector maps provided with the product.
You can set up your route in different ways:
• If you need a route for immediate navigation, you can select the destination and start
navigating to it right away (normal navigation).
• You can also plan a route independently of your current GPS position or even without
GPS reception. To achieve this you need to set a new starting point in My Route / Edit
Route by selecting the fl ag icon at the current position. This will also turn off the GPS
receiver so that the route is not recalculated when a new position is received.
You can plan routes with multiple destinations. Select the fi rst destination. Then select a
second destination and add it to your route to create a multi-point route. You can add as many
destinations to your route as you like.
3.1 Selecting the destination of a route
The navigation system offers you several ways of choosing your destination:
• Enter a full address or a part of an address (page 21).
• Enter an address with postal code (page 29).
• Select a Place of Interest from a database as your destination (page 32).
• Select a location on the map with the Find on Map feature (page 42).
• Use a previously saved Favorite destination (page 44).
• Select a location from the History of previously used destinations (page 45).
• Enter the coordinate of the destination (page 46).
NAV-6AVUAEA.indb20NAV-6AVUAEA.indb20 2013/07/3110:51:312013/07/3110:51:31
To Next Page
Loading...
Need help?
General
