Mazda NAVIGATION SYSTEM - Selecting a Map Location as the Destination

42
6. If is selected or it is not operated for a continuous 10 seconds, the route
guidance is started.
The set route can be checked by selecting MAP.
Note!
The route can be edited by selecting other options.
3.1.4 Selecting a map location as the destination
1. Tilt the commander to the left or right, or up or down to switch to the drag mode screen
(map reference screen).
2. Move the cursor to the desired destination location and press down the commander to
display the menu.
3. Select .
NAV-6AVUAEA.indb42NAV-6AVUAEA.indb42 2013/07/3110:51:342013/07/3110:51:34