60
4.2.1 Sound and Warnings
Adjust the sound volume, mute your device or change the voice guidance language. In
addition, you can enable and set up different warnings and alerts.
Button Description
Select this button to adjust the volume of the different sounds in the
application. A new screen shows the different sound types and their
controls. See below for details.
Maps may contain information about the speed limits of the road
segments. The navigation system is able to warn you if you exceed the
current limit. This information may not be available for your region (ask
your local dealer), or may not be fully correct for all roads in the map.
The maximum speed set in the vehicle profi le is also used for this warning.
The navigation system alerts you if you exceed the preset value even if
the legal speed limit is higher.
This setting lets you decide whether you wish to receive visible and/or
audible warnings.
Adjust the slider to set the relative speed above which the application
initiates the warning.
The following alert types are available:
• Audio warning: you receive a verbal warning when you exceed the
speed limit with the given percentage.
• Visual warning: the current speed limit is shown on the map when
you exceed it.
If you prefer to see the speed limit sign on the map all the time (normally it
is shown only if your speed exceeds it), you can set it here.
The speed limit warning display can be changed.
: Displays only when going over the speed limit
: Constant display
NAV-6AVUAEA.indb60NAV-6AVUAEA.indb60 2013/07/3110:51:372013/07/3110:51:37
To Next Page
Loading...
Need help?
General
