62
4.2.2 Traffi c settings
The recommended route is not always the same between two points. Whenever suitable data
exists, traffi c information can be taken into account in the route calculation.
Button Description
Use this switch to enable or disable historical traffi c data and traffi c
patterns. This locally stored information can be very useful in normal
circumstances but for example on public holidays it may be better to turn
off in order not to take into account normal weekday traffi c jams.
Use this switch to enable or disable receiving real-time traffi c information
online. The rest of the buttons below are all related to this real-time
information and are available only if receiving is enabled.
You can also defi ne whether to receive online traffi c via the 3G network or
only when connected to a WiFi network.
This setting determines how the navigation system uses the received real-
time traffi c information in route calculation. When calculating a new route,
or when recalculation becomes necessary based on the received Traffi c
events, the navigation system avoids traffi c events if it makes sense.
You can also set the minimum delay that triggers route recalculation, and
you can instruct the application if you want to confi rm every recalculation.
When setting a route in consideration of traffi c information, a time
setting is available which indicates the amount of possible time savings
obtainable by making a detour.
NAV-6AVUAEA.indb62NAV-6AVUAEA.indb62 2013/07/3110:51:372013/07/3110:51:37
To Next Page
Loading...
Need help?
General
