Form No.3351-1A-01A
F1-19
1 IAT sensor
2 MAF sensor
3 TP sensor
4 CMP sensor
5 CKP sensor
6 ECT sensor
7 Knock sensor
8 HO2S
9 VSS
10 Clutch switch (for MTX)
11 Neutral switch (for MTX)
12 TR switch (for ATX)
13 PSP switch
14 Brake switch
15 A/C switch, refrigerant pressure switch (high, low
pressure)
16 Generator (terminal P: output voltage)
17 DLC (terminal TEN)
18 Battery
19 Immobilizer unit
20 IAC valve
21 VICS solenoid valve
22 Fuel injectors
23 Ignition coil
24 PRC solenoid valve
25 Fuel pump relay
26 O2S heater (integrated with HO2S)
27 EGR valve
28 Purge solenoid valve
29 A/C relay
30 Condenser fan relay (for MTX)
31 Cooling fan relay
32 Condenser fan relay (for ATX)
33 Generator (terminal D: field coil)
34 Generator warning light (integrated with instrument
cluster)
35 IAC system
36 VICS
37 Fuel injection control
38 Immobilizer system
39 ESA control
40 PRC
41 Fuel pump control
42 O2S heater control
43 EGR control
44 Purge control
45 A/C cutĆoff control
46 Electrical fan control
47 Generator control
48 PCM
To Next Page
Loading...
