Mazda premacy - Lubrication System

Form No.3351-1A-01A
D
D-1
LUBRICATION SYSTEM
ABBREVIATIONS D-1...........................
OUTLINE D-1..................................
OUTLINE OF CONSTRUCTION D-1............
SPECIFICATIONS D-1........................
LUBRICATION MECHANISM D-2................
ABBREVIATIONS
R.H.D. Right hand drive
OUTLINE
OUTLINE OF CONSTRUCTION
D The construction and operation of the FP engine lubrication system for Australian specs. models are the same
as those of the current 323 (BJ) models. (Refer to 323 Training Manual 3327-10-98G.)
SPECIFICATIONS
Item
Specification
Item
FP
Lubrication system ForceĆfed type
Oil cooler Ċ
Oil pump
Type Trochoid gear
Oil pump
Relief pressure kPa {kgf/cm
2
, psi} 450Ċ530 {4.5Ċ5.5, 64Ċ78}
Type FullĆflow, paper element
Oil filter
Bypass pressure
kPa {kgf/cm
2
, psi}
79Ċ110 {0.8Ċ1.2, 12Ċ17}
Oil pressure kPa {kgf/cm
2
, psi} [rpm] 400Ċ490 {4.0Ċ5.0, 57Ċ71} [3,000]
Oil replacement (Approximate quantity)
L {US qt, lmp qt}
3.3 {3.5, 2.9}
Oil capacity
Oil and oil filter replacement
(Approximate quantity)
L {US qt, lmp qt}
3.5 {3.7, 3.1}
Total (dry engine)
(Approximate quantity)
L {US qt, lmp qt}
3.7 {3.9, 3.3}
Engine oil API service SG, SH, or SJ
Above 30 °C {86 °F} SAE 40
0 °CĊ40 °C {32 °FĊ104 °F} SAE 30
-10 °CĊ20 °C {14 °FĊ68 °F} SAE 20W-20
-15 °CĊ40 °C{5°FĊ104 °F} Ċ
Viscosity
Above -10 °C {14 °F} SAE 20W-40, 20W-50
Viscosity
Above -25 °C {-13 °F}
SAE 10W-30,
10W-40, 10W-50
Below 10 °C {50 °F} Ċ
-30 °CĊ37 °C {-22 °FĊ98 °F} SAE 5W-30
Below -20 °C {-4 °F} SAE 5W-20