Mazda premacy - Specifications

Form No.3351-1A-01A
K
K-3
SPECIFICATIONS
Item Australian specs.
Transaxle type FN4A-EL
1GR 2.816
2GR 1.497
Gear ratio 3GR 1.000
4GR 0.725
Reverse 2.648
Final gear ratio 4.147
ATF
Type ATF M-III or equivalent (e.g. DexronR II)
ATF
Capacity (L {US qt, lmp qt}) 7.2 {7.6, 6.3}
Torque converter stall torque ratio 2.120
Forward clutch
(number of drive/driven plates)
4/4
Hydraulic system
3Ċ4 clutch
(number of drive/driven plates)
3/3
Hydraulic system
Reverse clutch
(number of drive/driven plates)
2/2
Low and reverse brake
(number of drive/driven plates)
5/5
Band servo
Servo diameter
(piston outer dia.) (mm {in})
64.6 {2.54}
Front planetar gear
Front sun gear 49
F
ron
t
p
l
ane
t
ary gear
(number of teeth)
Front pinion gear 20
(number of teeth)
Front internal gear 89
Rear planetar gear
Rear sun gear 37
R
ear p
l
ane
t
ary gear
(number of teeth)
Rear pinion gear 30
(number of teeth)
Rear internal gear 98
Primary gear (number of teeth) 86
Secondary gear (number of teeth) 82
Output gear (number of teeth) 20
Ring gear (number of teeth) 87