Form No.3351-1A-01A
K-6
EC-AT OPERATION CHART
Shift pattern Transaxle Operation of shift solenoid
ge
h
h
2-4
brake
band
brake
ch
Solenoid valve
(dutyĆcycle type)
Solenoid
valve (ON/
OFF type)
Position/Ran
Mode Gear position
Shift
TCC
Engine brak
Forward clut
3-4 clutch
Reverse clut
Applied
Released
Low and reverse
OneĆway clu
Shift
solenoid A
Shift
solenoid B
Shift
solenoid C
Shift
solenoid D
Shift
solenoid E
P – – – – – – – ON OFF
R – Reverse 2.648 – OPEN OPEN OPEN OFF OFF
N – – – – – – – ON OFF
1GR 2.816 Ě OPEN CLOSE CLOSE OFF OFF
*
2GR 1.497 OPEN OPEN CLOSE OFF OFF
Ć
3GR 1.000 OPEN OPEN OPEN OFF OFF
NORĆ
4GR 0.725 CLOSE OPEN OPEN ON OFF
D
MAL
4GR *
2
TCC ON
0.725 CLOSE OPEN OPEN ON ON
2GR 1.497 OPEN OPEN CLOSE OFF OFF
3GR 1.000 OPEN OPEN OPEN OFF OFF
4GR*
3
0.725 CLOSE OPEN OPEN ON OFF
1GR 2.816 Ě OPEN CLOSE CLOSE OFF OFF
NonĆ
2GR 1.497 OPEN OPEN CLOSE OFF OFF
D
3GR 1.000 OPEN OPEN OPEN OFF OFF
S
4GR*
3
0.725 CLOSE OPEN OPEN ON OFF
2GR 1.497 OPEN OPEN CLOSE OFF OFF
3GR*
3
1.000 OPEN OPEN OPEN OFF OFF
4GR*
3
0.725 CLOSE OPEN OPEN ON OFF
1GR 2.816 Ě OPEN CLOSE CLOSE OFF OFF
NonĆ
2GR 1.497 OPEN OPEN CLOSE OFF OFF
D
3GR*
3
1.000 OPEN OPEN OPEN OFF OFF
4GR*
3
0.725 CLOSE OPEN OPEN ON OFF
L
1GR 2.816 Ě OPEN OPEN CLOSE ON ON
HOL
2GR*
3
1.497 OPEN OPEN CLOSE OFF OFF
D
3GR*
3
1.000 OPEN OPEN OPEN OFF OFF
4GR*
3
0.725 CLOSE OPEN OPEN ON OFF
*
1
: Automatically switches between POWER and NORMAL modes according to accelerator pedal depressing
speed.
*
2
: Perform TCC operation in NORMAL mode.
*
3
: To prevent engine overspeed, inhibits downshift until the engine speed is reduced to the preset speed.
: Operating
Ě: Transmits the torque only when driving.
OPEN: Engages the line pressure to the clutch pressure.
CLOSE: Drains the clutch pressure.
ON: Engages the output port and the supply port (Solenoid reducing pressure).
OFF: Engages the output port and the drain port (Drains the output port).