20
3.3.1 WIRING THE CD-DAC C31 WITH THE PREAMPLIFIER C11
CD-DAC in the pair of sockets labelled RCA. If the cable is directional and the plug features
a drawing of an arrow, secure the cable end in the socket of the CD-DAC whose arrow is
pointing away from the CD-DAC.
CD1.
Please ensure that the same channels are connected together in the two devices (right to
C31
C11
C15
C31
C11
3.3 COMBINATION CD-DAC C31, PREAMPLIFIER C11 AND
MONO POWER AMPLIFIER C15
single-ended
balanced
In this case the amplifers should be used with the XLR High setting as described in
shows the XLR variant.
– 1 balanced XLR pair of cables
– 2 loudspeaker cables
CD-DAC C31 Preamplier C11
To Next Page
Loading...
