23
3.5 WIRING THE POWER CABLES
your devices with the Power switch on the rear panel.
When you have completed this stage, your music system is activated and ready for
operation. All you have to do now to enjoy music is insert a CD, start the player and select
We wish you many hours of joy and pleasure with your MBL Cadenza Line music system!
3.4 CONNECTING THE SMARTLINK
All components of the MBL Cadenza Line can be connected to each other via the MBL
SmartLink, which allows you to operate the components more easily. This connection
adjust the display brightness in parallel.
If the CD-DAC C31 is part of an MBL Smart Link chain, the input selection is taken over and
To establish the connection, use the SmartLink connection
cable included in the delivery and plug it into the socket labeled
SmartLink. The other end of the cable is also plugged into a
SmartLink socket on the other component.
Attention: Please make sure that you do not create a closed
circuit when wiring. IMPORTANT!
button of the respective component.
Despite the SmartLink network, the device displays can also be dimmed separately. To do
this, press and hold the touchpad of the respective component for about 2 seconds until it
C31
C11
CD-DAC C31 Preamplier C11
To Next Page
Loading...
