4.5 FUNCTION BUTTONS
The control buttons are known as softkeys. Their respective functions are shown in a
context-sensitive manner in the display beneath the buttons.
5. MENU NAVIGATION
5.1 C31 MENU NAVIGATION
After you switch on the device by pressing the standby button, the standard diplay is
shown.
The upper line of the display shows the currently assigned functions of the soft keys.
Controlling the CD-drive is possible by using the soft keys. The symbol beneath the
Remote Control Functions.
To play a CD, insert it into the slot on the front of the C31 until the CD is transported into
the drive. Important hint: Just put in regularly shaped CDs, i.e. round ones with 12cm or
To get the CD out of the player, press the Stop-button on the remote control when the
player is already in stop mode. Should you accidentally have hit the Stop-button on the
remote control, you can wait another 10 seconds and the CD is drawn into the drive again.
Wait for the drive to move out the CD until it stops, then pull out the CD. Should you put in
a CD with mp3 content, the player shows one track, but the CD content cannot be played.
automatically.
Should you accidentally have put in a CD that is absolutely unreadable or upside down,
the display shows No Disk
seconds.
To change the digital input press the middle soft key In+/Menu, and the active input is
shown in the standard display. In case the C31 is within an MBL SmartLink chain the other
In+/Menu for a second or
Menu
C31
To Next Page
Loading...
