HIGH VOLUME LEVELS WHEN SWITCHING
ON OR DURING OPERATION
Do not listen at high or uncomfortable
volume levels for long periods of time as this
may result in permanent hearing loss. If you
experience hearing loss or ringing in your
ears, consult a physician.
Before connecting the device to a loudspeaker,
turn it o.
Before turning components on or o,
make sure that the volume controls on all
components are set to minimum. Failure to do
so may result in hearing loss, electric shock, or
damage to the speaker.
Always turn on the amplier LAST within
the audio chain to prevent hearing loss and
damage to the speakers.
For the same reason, turn the amplier OFF
FIRST.
Failure to follow the above instruction may
cause hearing loss or damage to the speakers.
AVOID DURING USE:
Sitting or standing on the housing or placing
heavy objects on the housing. This could cause
structural damage to the speakers as well as
damage to the high-quality and sometimes
delicate surfaces.
Placing any objects on parts of the cabinet as
this may damage or discolor the surfaces.
Applying excessive force to controls, switches,
terminals and other parts of the speakers.
Touching and pulling on the connected cables.
The CD-DAC C31 works internally with a
Class 1 laser. The device should not be opened,
no internal covers removed and not operated
in this way! The laser beam can damage your
eyesight! Do not look directly into the beam!
Unplug the device before opening it!
CLEANING AND MAINTENANCE
Before cleaning the device, unplug the power
plug from the socket. Failure to do so may
result in a health hazard, electric shock, and
damage to the unit or connected equipment.
Clean the appliance only with a dry, soft cloth.
First check in an invisible place to see if the
cloth leaves any micro-scratches. The use of
chemicals such as benzine or thinner, strong
detergents, or abrasive cleaners may cause
discoloration or damage to the surface.
To Next Page
Loading...
