22
5-5 : How to fold art paper/coated paper
5-5-1 : Replace with the separator for coated paper.
[1] Remove the paper feed roller shaft.
[2] Loosen the white knob screw and remove the special
paper separator for the art paper/coated paper.
[3] Pull out the separator which is fitted as standard, and
replace it with the special separator for coated paper.
The separator for coated paper has an indent in the center of its rubber part. Thus easily distinguishable from
the standard separator.
Standard separator Special separator for coated paper
To Next Page
Loading...
Need help?
General
