To Next Page

To Previous Page

5-8-2 : Calling up fold pattern memory

[1] Press the “Memory Fold” key .

[2] Using “▲” and “▼”keys, select the memorized fold

pattern and press the “OK” key.

Select desired memory number 01 thru 24 and press the

window. Note, in case all factor are the same for paper size,

folding pattern and speed, select by the register number.

[3]Once desired folding patter is retrieved, read and

confirm that paper size, folding pattern, speed and register

numbers are correct.

[4] Press the “TEST” key to perform test folding.

If test folding is satisfactory, proceed to step [5].

If it is not satisfactory, adjust folding misalignment.

When readjustment is required, repeat the above

procedure [1] to [4].

[5] Press the “START/STOP” key to conduct continuous

folding

Questions and Answers:

Need help?

Do you have a question about the MBM 405A and is the answer not in the manual?

MBM 405A Specifications

General