MC Crypt DP-263 - 10 Operation, Mains Connection

To Next Page

To Previous Page

10. Operation, mains connection

Proceed as follows:

1. Turn down the volume completely („VOLUME“ control).

2. Turn off the digital piano.

3. Connect the mains plug of the digital piano to a 230 V/AC, 50 Hz

mains socket.

4. Turn on the digital piano. The display lights up.

Turn the volume control („VOLUME“) slightly to the right.

Before turning off the digital piano again, turn down the volume completely. Then turn off the digital piano.

Now the digital piano may be disconnected from the mains supply. Pull the mains plug from the mains socket.