McHale 995 TSR User Manual

McHale 995 L+T Square Bale Wrapper
33
8.1.3 Channel 1 - Current/Target Wraps Display
The left hand section shows the current number of wraps and the right hand section
shows the target number of wraps.
When the current number = Target number, the alarm will sound for 2 seconds and the
display will flash. (If set, the early warning alarm sounds beforehand).
Automatic reset of the current number to zero normally occurs 3 seconds after the
target number is reached. If additional wraps are added after the target number is
reached, the current number will continue to advance.
Manually reset the current number of wraps to zero
Program the target wraps
Press to select NORMAL Channel
Press and hold to reset
Press to select NORMAL
Hold continuously
The third digit flashes

McHale 995 TSR Specifications

General

Brand	McHale
Model	995 TSR
Category	Stretch Wrapping Systems
Language	English