McHale W2020 - Page 76

McHale W2020 Round Bale Wrapper
76
Declaration of Conformity
DECLARATION OF CONFORMITY
We hereby certify that the machinery stipulated below complies with all the relevant provisions of the
EC Machinery Directive 2006/42/EC and the national laws and regulations adopting this directive.
Modifications to the machine, without prior approval from the undersigned,
will render this declaration null and void.
Machine description and function: Round bale wrapper for wrapping bales of agricultural fodder
with agricultural bale wrap film. It also operates as a bale handler.
Model: W2020 Serial Number: _____________
Name of manufacturer:
Address:
McHale Engineering
Ballinrobe, Co. Mayo, Ireland, F31 K138
Is also in conformity with the provisions of the following other EU directives:
2014/30/EU - Electromagnetic compatibility (EMC)
Technical file compiled by: James Heaney
c/o McHale Engineering
Ballinrobe, Co. Mayo, Ireland, F31 K138
Harmonised standards applied:
EN ISO 12100
Safety of machinery - General principles for design - Risk assessment and
risk reduction
EN ISO 4254 - 1 Agricultural machinery - Safety - Part 1: General requirements
EN ISO 4254 - 14 Agricultural machinery - Safety - Part 14: Bale wrappers
Signed:
Date: ...................................
Place: Ballinrobe, Co. Mayo, Ireland, F31 K138
Name: James Heaney
Position: Design Office Manager
Signed:
Date: ...................................
Place: Ballinrobe, Co. Mayo, Ireland, F31 K138
Name: Gerry Corley
Position: Quality Manager
55
I.S. EN ISO 9001:2015