www.marketdirect.com.au Ph: 1300 494 494
48
Plumbing
Hot Water System
Water Pump
Problem Possible Cause Remedy
No power • Turned off at control panel.
• Tripped breaker
• Turn on at control panel.
• Reset breaker
Not lighting • Flue cover not removed
• No gas supply..
• Air in gas line
• Remove ue cover.
• Check bottle has gas and turned on.
• Repeat start procedure until air is
purged from the system
Problem Possible Cause Remedy
Not running (no sound) • Power off at control panel.
• Switch beside kitchen turned off
• Switch on power.
• Turn on switch at kitchen
Air and water spitting from
tap
• Water tank empty
• Split hose
• Fill tanks.
• Repair hose
Running but poor pressure • Gauze lter at pump blocked • Clear lter of debris
To Next Page
Loading...
