MDC XT12HR 2021 - Maintenance Schedule & Service Record

62
Maintenance Schedule & Service Record
500KM FIRST SERVICE
CHECKED
Hitch
• Check hitch bolts to 90Nm.
• Lubricate with high temp bearing grease
Handbrake
• Inspect and adjust handbrake
Brakes &
Bearings
• Inspect and adjust brakes. Check bearings are well greased and crown nut is correctly
ghtened.
Wheel nuts
• Inspect condion and torque to 125Nm (12mm studs)
(140Nm 14mm studs alloy rims) (200Nm 14mm studs steel rims)
Tyres
• Inspect for abnormal wear, damage, and pressure
General fixings
• Ensure no loose fings
Seals & Latches
• Check all seals on doors and hatches compress 30-50%. All seals in serviceable
condion and free of damage.
Suspension
• Grease bushes and check for play.
• Check torque on suspension hanger bolts (190nm)
• Check retaining chain shackles ght.
Service Centre:
Notes:
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________