Measurement Computing WebDAQ 504 User Manual

WebDAQ 504 User's Guide Functional Details
19
Updating WebDAQ firmware
Device firmware is bundled with the operating system, web server, and documentation in a software update
(*.swu) file. Firmware updates are posted on the Measurement Computing Firmware Updates
page and are
available for download.
Use the web interface to install the *.swu update file. Open a browser window and enter http://webdaq-
xxxxxx.local/Help
, where xxxxxx is the last 6 digits of the MAC address – refer to the label on the bottom of
the enclosure. Refer to the
Updating WebDAQ Firmware help topic or FAQ for instructions.
Calibrating the hardware
The Measurement Computing Manufacturing Test department performs the initial factory calibration. Return
the device to Measurement Computing Corporation when calibration is required. The recommended calibration
interval is one year.

Measurement Computing WebDAQ 504 Specifications

General

Brand	Measurement Computing
Model	WebDAQ 504
Category	Data Loggers
Language	English