Page 3-6
May 2005 1532ES / 1932ES Operator’s Manual
FREQUENT INSPECTION
THIS INSPECTION MUST BE COMPLETED EVERY 3 MONTHS
OF SERVICE OR 150 HOURS, WHICHEVER OCCURS FIRST,
OR IF A MACHINE HAS BEEN OUT OF SERVICE FOR
GREATER THAN 3 MONTHS. FAILURE TO DO SO COULD
RESULT IN DEATH OR SERIOUS INJURY.
♦ Owner/User is responsible for Frequent Inspections.
♦ The inspection must be performed by a person(s) qualified as a me-
chanic on this specific make and model of aerial work platform.
♦ Keep inspection records up-to-date.
♦ Record and report all discrepancies to your supervisor.
MODEL NUMBER____________ SERIAL NUMBER_________________
INITIAL DESCRIPTION
________ 1. Perform all checks listed on Prestart Inspection.
________ 2. Inspect the condition of hydraulic fluid in the reservoir. Oil should have a
clear amber color.
________ 3. Inspect the entire machine for signs of damage, broken welds, loose
bolts, improper or makeshift repairs.
________ 4. Check the pin joints and retaining rings for security.
________ 5. Check if tires are leaning in or out.
________ 6. Check that all adjustable flow valves are locked, check setting if any are
not locked.
________ 7. Check that the platform does not drift down with a full load.
________ 8. Check the electrical motor brushes.
DATE______________________ INSPECTED BY______________________
To Next Page
Loading...
