Page 27 SE
AC
Slab Series - Operator’s Manual
November 2022Section 7 - Operating Instructions & Functions Test
Error Indicator Readout
The Error Indicator Readout is located at the Upper Controls station. Consult
the Service & Parts Manual for Alarm Code descriptions. Manuals are available
free online at www.MECawp.com.
Shutdown Procedure
When nished with the machine, place the platform in the stowed position.
Park the machine on a level surface.
Turn the Key Switch to the OFF position and remove the key to prevent unauthorized use.
Carefully exit the platform using a constant three (3) point dismount/grip.
Always put the main power switch in OFF position when leaving the machine at the end of the work
day.
Charge the batteries.
To Next Page
Loading...
