Mec 85-J - Safety Symbols and Fall Protection

Page 3 85
-
J - Operator’s Manual - 95803
January 2024Section 2 - Safety
Safety Alert Symbols & Fall Protection
MEC manuals and decals use symbols, colors and signal words to help you recognize important
safety, operation and maintenance information.
NOTICECAUTION
CAUTIONWARNINGDANGER
ART_6091
RED and the word DANGER – Indicates an imminently hazardous
situation which, if not avoided, will result in death or serious injury.
NOTICECAUTION
CAUTIONWARNING
ART_6091
ORANGE and the word WARNING – Indicates a potentially hazardous
situation which, if not avoided, could result in death or serious injury.
NOTICECAUTION
CAUTION
ART_6091
YELLOW with alert symbol and the word CAUTION – Indicates a
potentially hazardous situation which, if not avoided, may result in minor
or moderate injury.
NOTICECAUTION
ART_6091
YELLOW without alert symbol and the word CAUTION – Indicates a
potentially hazardous situation which, if not avoided, may result in
property damage.
NOTICE
ART_6091
GREEN and the word NOTICE – Indicates operation or maintenance
information.
Fall Protection
Operators must comply with employer, job site and governmental rules
regarding the use of personal protective equipment.
If required by your employer or job site, use personal fall protection
equipment (PFPE) when operating this machine.
ART_4713
All PFPE must comply with applicable governmental regulations, and must be inspected and used in
accordance with the PFPE manufacturer’s instructions.
Fall restraint must be properly attached to a designated anchorage point when driving or operating
the machine. Attach only one fall restraint to each anchorage point.