12
COMPACT PIEZO LED
During the intervention, avoid prolonged
contact with retractors or with metallic
instrumentation in use. Do not exert excessive
pressure on the insert tips during their use.
WARNING:
pointed inserts with particular care. During
could cause harm.
4.4 InstructionsforUse
Correctly insert the scaler handpiece
onto its cord by matching the alignment
notch on the handpiece connector with
are perfectly dry and if necessary dry
them by blowing with compressed air;
1
Screw in the preselected insert on the
comes into contact
2
Tighten the insert using the Mectron
wrench, proceed as follows:
• Place the insert inside the
3
To Next Page
Loading...
