17
6 CLEANINGANDSTERILIZATION
NOTE:
end of service life of devices and accessories
is generally determined by wear or damage
resulting from use. Mectron guarantees the
integrity of its scaler handpieces for up to 250
reconditioning cycles.
CAUTION: The cleaning and sterilising
operations described in the following
6.1 CleaningoftheAccessoriesthatcanbeSterilised
NOTE: Cleaning procedures should be
performed immediately after each use.
detergent solution immediately after use. Do
not leave residues or blood on insert tips and
instruments, remove coarser impurities with a
disposable cloth or paper.
The following parts of the device can be
• Scaler handpiece;
• Scaler nose cone;
• Scaler light pipe;
• Insert tips;
•
CAUTION: Do not immerse the handpiece
these could damage it.
CAUTION: Do not immerse the handpiece
CAUTION: The following instructions
to enable the medical device to be reused.
The person responsible for the maintenance,
that repeated processes are actually carried
in the reprocessing structure in order to
achieve the desired result. This generally
monitoring of the process. Similarly, all
deviations from the instructions provided
by the person responsible for the processes
should be properly evaluated for judging the
To Next Page
Loading...
