34
COMPACT PIEZO LED
9.1.2 AccessiblePartsoftheCasing
an environment.
Phenomenon
BasicEMC
standardortest
method
Immunitytestlevels
Electromagnetic
environment-Guidance
Electrostatic
discharges
wood, concrete or ceramic
with synthetic material, the
relative humidity should be at
communication devices
should not be used near any
part of the product, including
cables, except when they
respect the recommended
distances, calculated from the
magnetic
have levels characteristic
of a typical location in a
commercial or hospital
environment.
The interface between the PATIENT physiological
shall be located within 0,1 m of the vertical plane
reception. Testing may be performed at other
intentional receiver when an ambient signal is in the
passband. It is understood that the receiver might not
achieve normal reception during the test.
Testing may be performed at other modulation
with magnetically sensitive components or circuitry.
powered at any NOMINAL input voltage, but with the
Before modulation is applied.
This test level assumes a minimum distance between
adjusted as appropriate for the minimum expected
distance.
To Next Page
Loading...
