24
COMPACT PIEZO LED
solution, gently brush all surfaces to
remove any visible dirt.
Use a clean, soft nylon bristle brush for
external surfaces, a clean, soft nylon
bristle pipe cleaner for internal cavities
and crevices.
NOTE: Carefully brush all of the
about 20 seconds:
• Through holes and internal
channels;
•
sharp edges and in particular the
interstices between the cutting
cusps;
• External metal ring;
• Internal cavities, grooves and
crevices.
23
Thoroughly rinse and brush all surfaces
minutes;
24
detergent solution at 24 ° C ± 2 ° C and
run a cycle of at least 20 minutes;
25
To Next Page
Loading...
