COMPACT PIEZO LED
The test may be performed at any one power input
additional voltages.
the test.
Calibration for current injection clamps shall be
amateur band, as applicable, an additional test
band. This applies to each ISM and amateur radio
Testing may be performed at other modulation
shall be tested using a converter that meets the
LEVELS are applied to the a.c. power input of the
converter.
phases shall be interrupted simultaneously.
a surge protection device in the primary power circuit
Direct coupling shall be used.
At some phase angles, applying this test to ME
EQUIPMENT with transformer mains power input
might cause an overcurrent protection device to open.
transformer core after the voltage dip. If this occurs,
during and after the test.
multiple voltage settings or auto ranging voltage
capability, the test shall be performed at the minimum
range.
To Next Page
