How to fix mectron Medical Equipment that won't turn on?
If your mectron Medical Equipment isn't turning on, there are a few things to check: * Ensure the power cable is firmly connected to the socket on the rear of the device. * If the cable is properly connected, the power cable may be faulty and need to be replaced. * Also, the fuses might be unserviceable and need replacement.
What to do if no liquid comes out of the insert during mectron Medical Equipment operation?
If no liquid is coming out of the insert during operation of your mectron Medical Equipment, consider the following: * Ensure you are using an insert designed for liquid through-flow. * Check that the PUMP function is not set to zero. If it is, press the + key on the front panel. * Verify the liquid bag is full. * Make sure the drip system's air intake is open. * Confirm the tubes of the drip system and pump are correctly installed. * Check if the insert is clogged and, if so, clear the blockage.
What to do if mectron Medical Equipment shows ERR on display and does not work?
If your mectron Medical Equipment is on but not working and displays 'ERR', try these steps: * Ensure the insert is correctly fitted into the handpiece by unscrewing it and screwing it back in. * If the insert is worn, broken, or deformed, replace it. * Check the connector of the cord and dry the connectors if they are wet.
General| Brand | mectron |
|---|---|
| Model | Piezosurgery II |
| Category | Dental equipment |
| Language | English |
To Next Page
